One-Stop Service Solution for Project Materials Supply Management
Menu
Broady offering a world-class range of Relief, Safety Relief, Pressure Reducing, Pilot Operated Safety Relief, Surplus and Gas Blanketing Valves.
Suitable for use on compressed air, gases, water, oil and steam.
**Is this statement correct? **
The Type 180/180-S Pressure Relief Valves are suitable for use on compressed air, gases, water, oil and steam.
The Type 180 valve is available in sizes from ½” to 3″ in Bronze while the Type 180-S valve is available in sizes from ½” to 2” in Stainless Steel, both have screwed BSP ends male inlet x female outlet, although other end connections are available on request.
Both relief valves are available with the option of metal to metal precision lapped seats or Viton soft seats.
Sizes
1/2″ to 3″ (Bronze)
1/2″ to 2″ (Stainless Steel)
Screwed Connections
NPT or BSP (Male x Female or Female x Female)
Material
Bronze or Stainless Steel
Set Pressure
0.35 Barg to 24 Barg (15NB up to 50NB)
0.35 Barg to 13.79 Barg (65NB to 80NB)
Medium
Gas, compressed air, water, oil and steam applications.
Essential in diverse applications such as petro-chemical, power generation and pharmaceutical
**Is this statement correct? **
The Type 2600 Relief/Safety Relief Valve is designed to have a short ‘simmer’, then to open rapidly to the full open position, and to re-seat at a controlled pressure. When the valve is in its fully lifted position the discharge area is controlled by the bore of the nozzle, which ensures that flow calculations for various mediums can be reliably made.
Valves are supplied in sizes ½” to 1” and can be manufactured in Gunmetal, Cast Steel and Stainless Steel with ends screwed male x female, female x female or flanged to customers requirements.
Valves can also be supplied with a packed lever lifting device, limit switch to indicate opening and closing of the valve, governing ring to limit adjustment of the spring to the set point, for ease of re-setting.
Sizes
1/2″ x 1″, 3/4″ x 1″, 1″ x 1″
Design Standards
API 520 (Latest Ed.)
Flanges
In accordance with ASME B16.5, DIN EN 1092-1 or JIS 2220
(Other standards/options available upon request)
Screwed Connections
NPT or BSP (Male x Female or Female x Female)
Material
Carbon Steel, Stainless Steel, Duplex, Super Duplex, Inconel and more.
Orifice Designations
0.040 / 0.060 / 0.110 Sq. In.
Set Pressure
0.76 Barg to 156 Barg
Medium
Gas, liquid and vapour applications.
A full lift design offering superior flow capacities suitable for steam, gas and liquid services
**Is this statement correct? **
The Type 3500 relief/safety relief valve is designed to have a short ‘simmer’, then to open rapidly to the full open position, and to re-seat at a controlled pressure. When the valve is in its fully lifted position, the discharge area is controlled by the bore of the nozzle, which ensures that flow calculations for various mediums can be reliably made.
Valves are supplied in sizes 1” x 2” to 8” x 10”, orifices ‘D’ through to ‘T’ and can be manufactured in Cast Steel, Stainless Steel and many other materials to suit the application, with flanges to customers requirements.
Valves can also be supplied with a packed lever or open lever lifting device, limit switch to indicate opening and closing of the valve, governing ring to limit adjustment of the spring to the set point, for ease of re-setting, balanced bellows when there is a variable back pressure.
Sizes
1″ x 2″ up to 8″ x 10″
Design Standards
ASME Section VIII Division 1 (Latest Ed.)
API 520 (Latest Ed.)
API 526 (Latest Ed.)
Flanges
In accordance with ASME B16.5, DIN EN 1092-1 or JIS 2220
(Other standards/options available upon request)
Material
Carbon Steel, Stainless Steel, Duplex, Super Duplex, Inconel and more.
Orifice Designations
API orifice designations from ‘D’ to ‘T’
Set Pressure
0.34 Barg to 425 Barg
Medium
Gas, liquid and vapour applications.
Essential in diverse applications such as petro-chemical, power generation and pharmaceutical
**Is this statement correct? **
The Type 3600 Safety Relief Valve is designed to have a short ‘simmer’, then to open rapidly to the full open position, and to re-seat at a controlled pressure. When the valve is in its fully lifted position, the discharge area is controlled by the bore of the nozzle, which ensures that flow calculations for various mediums can be reliably made.
Valves are supplied in sizes ½” to 1” and can be manufactured in Cast Steel or Stainless Steel (other materials available on request) with ends screwed male x female, female x female or flanged to customer requirements.
Valves can also be supplied with a packed lever lifting device, a limit switch to indicate opening and closing of the valve, or a governing ring to limit adjustment of the spring to the set point, for ease of resetting.
Sizes
1/2″ x 1″, 3/4″ x 1″, 1″ x 1″
Design Standards
ASME Section VIII Division 1 (Latest Ed.)
API 520 (Latest Ed.)
Flanges
In accordance with ASME B16.5, DIN EN 1092-1 or JIS 2220
(Other standards/options available upon request)
Screwed Connections
NPT or BSP (Male x Female or Female x Female)
Material
Carbon Steel, Stainless Steel, Duplex, Super Duplex, Inconel and more.
Orifice Designations
Liquid 0.110 / Gas 0.132 Sq. In.
Set Pressure
0.34 Barg to 290 Barg
Medium
Gas, liquid and vapour applications.
One-Stop Service Solution for Project Materials Supply Management
PIPELINE PROCESS & SYSTEMS PTE LTD
31 Woodlands Close, #06-35
Woodlands Horizon
Singapore 737855
Sales Enquiry: Singapore
Email: [email protected]
Tel: (65) 6570 0310
For support, contact us on our Viber channel (available in Myanmar language)
© 2024 by Pipeline Process & Systems Pte Ltd
Co Reg. No.: 200504016-Z
All rights reserved.